It appears that your cart is currently empty
It appears that your cart is currently empty
Xvive Audio U2R Receiver Used with a U2 Transmitter
THE SYSTEM
The system comprises a transmitter unit, which connects to your audio source (typically an electric guitar or bass), and a receiver, which connects to an amplifier, effect pedal/pedalboard, DI box, or audio interface.
PRESERVE YOUR TONE
The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!
TAKE CHARGE
The internal battery in the transmitter and receiver lasts 5 hours. Both units can be easily charged simultaneously using the included dual-USB cable and any standard 5V USB charger. Depending on the charger's current, charging takes between 1.5 and 2.5 hours.
APPLICATIONS
U2 can be used to replace any ¼” instrument cable. The most common application is to wirelessly run a guitar or bass to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!
UNCHAINED
Going wireless at home is liberating, especially if you feel most comfortable with your instrument in hand. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio.
QUICK SWITCH
If you have more than one transmitter, you can connect one to each guitar. When switching guitars, power off the transmitter before you remove the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel!
General Features:
Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.