It appears that your cart is currently empty
Rockford P300-8P Punch Series Compact 300W Powered 8" Car Audio Subwoofer
Rockford Fosgate Punch P300-8P 300 Watts RMS, Loaded 10" Powered Sealed Subwoofer Enclosure
The P300-8P powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features an 8” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-8P is the right one for the job! The P300-10 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
- High-Efficiency, Low Current Amplifier Design
- Optimized 8" Low Impedance Woofer
- 300 Watt Class-D Amplifier with Optimized "Closed Loop" Design
- Adjustable 12db/Octave low pass crossover
- On-Board Phase Switch
- Intelligent auto turn on/off function
- Robust Power/Ground connections
- Quick Input Connections for Easy Removal
- On-Board Adjustable Bass EQ
- Remote bass level control included
- Separate low level and speaker level inputs
- Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish
- Thermal and over/under voltage protection
- Slim Design For Truck Applications
- CEA-2031 Compliant
- CEA-2006 Compliant
- Frequency Response: 30Hz-200Hz
- Power Handling (RMS): 300W
- Enclosure Type: Vented
- Crossover Controls: Variable 50Hz-200Hz, 12dB/Octave Butterworth
- Tone Controls: Bass Boost 0dB-+12dB
- Phase Control: 0-180
- Input Impedance: 20k Ohms
What is in the box:
- Rockford Fosgate P300-8P owner's manual
- Powered subwoofer enclosure
- Remote Punch Level Control (w/ mounting plate and 2 screws)
- 16.5' Remote cable (3.5mm stereo plugs on both ends)
- Power/ground terminal block
- 12" Input harness (4-pin Molex - RCA)
- 25" Strip of hook-and-loop fastener
- 3mm Allen key
- Four 10A ATO fuses (two installed / two spare)
- Installation manual
⚠️Warning:
Cancer and Reproductive Harm-Www.P65warnings.Ca. Gov