Your Cart is Empty


Rockford Fosgate Punch P300-8P 300 Watts RMS, Loaded 10" Powered Sealed Subwoofer Enclosure + Absolute 8 Gauge Wiring Amp Kit

Rockford Fosgate Punch P300-8P 300 Watts RMS, Loaded 10" Powered Sealed Subwoofer Enclosure + Absolute 8 Gauge Wiring Amp Kit

The P300-8P powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features an 8” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-8P is the right one for the job! The P300-10 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.

General Features:

  • High-Efficiency, Low Current Amplifier Design
  • Optimized 8" Low Impedance Woofer
  • 300 Watt Class-D Amplifier with Optimized "Closed Loop" Design
  • Adjustable 12db/Octave low pass crossover
  • On-Board Phase Switch
  • Intelligent auto turn on/off function
  • Robust Power/Ground connections
  • Quick Input Connections for Easy Removal
  • On-Board Adjustable Bass EQ
  • Remote bass level control included
  • Separate low level and speaker level inputs
  • Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish
  • Thermal and over/under voltage protection
  • Slim Design For Truck Applications
  • CEA-2031 Compliant
  • CEA-2006 Compliant
  • Frequency Response: 30Hz-200Hz
  • Power Handling (RMS): 300W
  • Enclosure Type: Vented
  • Crossover Controls: Variable 50Hz-200Hz, 12dB/Octave Butterworth
  • Tone Controls: Bass Boost 0dB-+12dB
  • Phase Control: 0-180
  • Input Impedance: 20k Ohms

What is in the box:

  • Rockford Fosgate P300-8P owner's manual
  • Powered subwoofer enclosure
  • Remote Punch Level Control (w/ mounting plate and 2 screws)
  • 16.5' Remote cable (3.5mm stereo plugs on both ends)
  • Power/ground terminal block
  • 12" Input harness (4-pin Molex - RCA)
  • 25" Strip of hook-and-loop fastener
  • 3mm Allen key
  • Four 10A ATO fuses (two installed / two spare)
  • Installation manual

    Absolute Kit-8 (Kit8)

    8 Gauge Complete Amplifier Kit for System Up To 1000 Watts

    Product Features:

    • Complete 8 Gauge Amplifier Kit
    • Designed Specifically for Car Audio Systems 1000 Watts and Up
    • Premium Power and Ground Wire Provides Optimal Power Transfer
    • Includes 2-Channel RCA Interconnect Cables for The Audio Signal Connection from The Receiver to The Amplifier
    • Terminals Are Gold-Plated for Excellent Signal Transfer
    • AGU Fuse Holder Offers Ideal Protection for High Powered Systems
    • Authorized Internet Dealer
    • 1-Year Manufacturer's Warranty

    Package Includes:

    1. 17 Ft. Of 8 Gauge Clear Red Power Cable
    2. 3 Ft. Of 8 Gauge Clear Black Ground Cable
    3. 17 Ft. Of 18 Gauge Clear Blue Trigger Wire
    4. 17 Ft. Of 18 Gauge Clear Blue Speaker Wire
    5. 17 Ft. Of Clear Red RCA Cable
    6. 6 Ft. Of Black Split Loom Tube
    7. AGU Fuse Holder
    8. 60a ATC Fuse
    9. Two 8 Gauge Ring Terminals
    10. Two 8 Gauge Spade Terminals
    11. One Black Snap-On Grommets
    12. Ten Cable Ties

    Cancer and Reproductive Harm-Www.P65warnings.Ca. Gov