Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm
The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers.
General Features:
- Punch BD Series Monoblock Class BD Car Amplifier
- RMS Power Rating:
- 4 ohms: 300 watts x 1 channel
- 2 ohms: 500 watts x 1 channel
- 1 ohm: 1000 watts x 1 channel
- CEA-2006 compliant amplifier
- Features C.L.E.A.N. Set-up with the 10-step set-up procedure
- w/ input/output clip detection and indicator LEDs
- MOSFET power supply
- Muted turn on
- Cast aluminum heatsink
- 12dB/octave Butterworth crossover
- Stealth top-mounted control panel
- LED power, thermal, and protection indicators
- Nickel-plated captive C-clamp terminals
- Ultra-efficient Class BD circuitry to maximize amplifier power efficiency
- On-board differential inputs eliminate noise picked up by the signal cable
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
- MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
- Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
- Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low
- DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
- Input sensitivity: 150mV - 12V
- On-board Punch EQ with +18dB boost @ 45Hz.
- Variable low-pass filter: 50-250 Hz
- Selectable infrasonic filter: off / 28 Hz
- Frequency response: 20 - 250 Hz
- Total Harmonic Distortion: <1.0%
- Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H
- 8 AWG to 18 AWG speaker wire output terminals
- 4 gauge power and ground wiring is recommended for installation.
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
What is in the P1000X1bd package:
- P1000X1bd owner's manual
- Mono subwoofer amplifier
- Four 1-1/2" Self-tapping screws
- 5mm Allen wrench
- Quick setup instructions
⚠️Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.