It appears that your cart is currently empty
Rockford Fosgate Punch P1-2X12 & P500X1BD
1000W Peak Punch P1 Dual 12" Loaded Subwoofer Enclosure Ported
Rockford Fosgate Punch P1-2X12 & P500X1BD<BR/>1000W Peak Punch P1 Dual 12" Loaded Subwoofer Enclosure Ported
General Features:
- Two 12" Single 4-ohm Punch Stage 1 Subwoofers
- Total Power Handling:
- Peak: 1000 watts
- RMS: 500 watts
- Recommended power range: 250 - 600 watts RMS @ 2-ohm
- CEA-2031 Compliant
- Klippel Verified
- Flex-fit Mounting pattern
- Proprietary spider venting/cooling technique
- StampCast basket with integrated spider venting
- Sturdy 16-gauge compound bend frame geometry
- High modulus Kevlar re-inforced paper-pulp cone
- Semi-flexible, PVC removable protective motor cover
- Multi-point high-temp/high-strength neck joint bonding technique
- Tall-profile VAST Santoprene surrounds for larger surface area.
- Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
- Fatigue-resistant and reduced strain "stitched on" flexible lead wire design.
- Proprietary all-metal, radially oriented compression input terminal assembly
- Optimized motor magnetics with extended pole and bumped vented backplate.
- High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar.
- The die-cast aluminum soft-touch painted trim ring allows for the optional integrated grill.
- Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12
- Magnet Weight: 45 oz
- Frequency Response: 20 - 250 Hz
- Xmax: 9mm
Enclosure Features:
- Dual 12" Loaded, Ported Box
- Solid 5/8" MDF Construction
- Front-firing tuned port.
- Spring-loaded binding posts
- Complete with high-density black box carpeting
- Dimensions: 15-1/8"D x 33-7/8"W x 15-3/4"H
- Punch BD Series Monoblock Class BD Car Amplifier
- RMS Power Rating:
- 4 ohms: 150 watts x 1 chan.
- 2 ohms: 300 watts x 1 chan.
- 1 ohm: 500 watts x 1 chan.
- CEA-2006 compliant amplifier
- MOSFET power supply
- Muted turn-on.
- Cast aluminum heatsink.
- 12dB/octave Butterworth crossover
- Stealth top-mounted control panel
- LED power, thermal, and protection indicators.
- Nickel-plated captive C-clamp terminals.
- Ultra-efficient Class BD circuitry to maximize amplifier power efficiency.
- On-board differential inputs eliminate noise picked up by the signal cable.
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
- MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span.
- Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
- Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low.
- DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers.
- Input sensitivity: 150mV - 12V
- On-board Punch EQ with +18dB boost @ 45Hz.
- Variable low-pass filter: 50-250 Hz
- Selectable infrasonic filter: off / 28 Hz
- Frequency response: 20 - 250 Hz
- Total Harmonic Distortion: <1.0%
- Dimensions: 11"L x 7-3/4"W x 2-3/8"H
- 8 AWG to 18 AWG speaker wire output terminals
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.