+1(310)905-0006

Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, Absolute KIT4ANL wiring AMP Kit

This bundle includes an Alpine SBV-10-WRA 10" Loaded Weatherproof Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier, and an Absolute KIT4ANL wiring AMP Kit.

Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU

When you have a Wrangler, you don't have extra space to spare. Alpine engineered the SBV-10-WRA to fit conveniently under the front passenger's seat, making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet. Enjoy impactful bass, with your Wrangler's top on or off. The SBV-10-WRA delivers lower-frequency sound into the passenger's footwell to deliver high-quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends.

General Features:

• 10" High-Performance Transducer Sealed Subwoofer Enclosure
• Power Handling:
• Peak: 1000W Total
• RMS: 300W Total
• Final Impedance: 2 ohms
• Preloaded with single 10" Series Subwoofers
• Sealed Enclosure with (finish type)
• Enclosure Dimensions: 16-1/4" L x 15-3/4" W x 8-3/8" H

Subwoofer Features:

• Water Resistance: IP66 Rating
• Frequency Response: 35-200Hz
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier

A TOUGH MINI AMP THAT PACKS A PUNCH

Get big amp performance in a compact, resilient package. With Alpine's exclusive Dynamic Peak Power (D.P.P.) technology, the KTA-30MW Weather-Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in open-cab vehicles and toys. This small, efficient amplifier can be installed with an aftermarket or factory head unit, adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for exposed installations such as side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.

A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT

The KTA-30MW is perfect for adding subwoofer power without space for a large amplifier. It is compatible with aftermarket or factory head units and delivers up to 600 DPP watts to your subwoofer of choice.

HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS

The KTA-30MW measures just 9-3/16" (W) x 1-5/8" (H) x 3-3/4" (D), so its small footprint lets it fit where most amplifiers won't, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.

General Features:

• Alpine KTA-30MW
• Class D Monoblock Weather-Resistant Power Pack Amplifier
• 300 Watts RMS X 1 @ 4 Ohms Power Handling
• 600 Watts RMS X 1 @ 2 Ohms Power Handling
• CTA-2006 compliant
• Frequency Response: 20-400 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: 83dB
• Variable Low Pass filter 50-400Hz @ -24dB/Oct.
• Variable Bass Boost (0-12 dB at 50 Hz)
• Fuse Rating: 25A
• Weather-resistant (IP66 rating)
• Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
• Dimensions: 7" W x 3.5" H x 1.25" D
• Authorized Dealer
• 1-year Manufacturer's Warranty

What is in the box:

• Mono amplifier
• 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other ends)
• 4 Self-tapping screws (Length 3/4")
• Connection sheet
• Limited Warranty sheet
• Alpine KTA-30MW owner's manual

Absolute KIT4ANL Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts ANL Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme

Installing a car amplifier is already enough of a job without having to worry about finding the right wire and installation accessories. What you might not know is that some companies are playing gimmicks, and you could end up getting ripped off!

Today, I recommend KIT4ANL for all DIY and installers. This is a wiring kit with an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) to keep costs down while remaining highly flexible and installer-friendly. The speaker wire kicks ass, and I wasn't expecting such high-quality speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include.

General Features:

• Complete 4 Gauge Amplifier Kit
• Designed specifically for car audio systems up to 1000 watts
• Premium power and ground wire provide optimal power transfer
• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
• Terminals are gold-plated for excellent signal transfer
• For use in any car, truck, RV, or boat
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Package Includes:

• 16 ft. of 4 AWG high current power cable
• 3 ft. of 4 AWG ground cable
• 17 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
• 20 ft. of 12 AWG OFC Speaker cable
• 20 ft. of 16 AWG remote turn-on wire
• 6 ft. of split loom tubing
• 1 Gold-plated 80 AMP AGU fuse
• 1 4 AWG gold ring terminal
• 1 ANL 4 AWG water-resistant inline fuse holder
• 1 PCS 100 AMP ANL Fuse
• 2 Ring terminals
• 2 Spade terminals (4 gauge)
• 5 Spade terminals (14-16 gauge)
• 3 Self-tapping screws
• 1 Rubber grommet
• 20 Black cable ties
• 2 Butt connectors (18-22 gauge)
• 1 Butt connector (4 gauge)

Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.