+1(310)905-0006

Alpine S2-S65C 6.5" Component speaker Compatible Fit for Honda 6.5" Or 6.75" Speaker Adapter with Speaker Harness

Our Speaker Adapter Package is used to replace your factory speakers with higher-quality aftermarket speakers. Speaker adapters will allow you to quickly and easily replace your current car speakers. The adapter kit will mount the speakers securely in your vehicle without the need for modification. The harness will allow you to connect to your vehicle without cutting your factory wiring while maintaining the proper polarity of the speakers. By using an adapter/harness kit, you can easily reverse the installation should you decide to sell or trade your vehicle. You can then install your higher-quality speakers in a new car.

Interchange Speaker Adapter Kit: American International HSB524, Scosche SAHC634
Interchange Speaker Harnesses: Metra 72-7800, Scosche SHHA02B

Vehicle Compatibility:
Acura:

• 2007-2012 RDX - Front And Rear Speaker Locations
• 2009-2013 TL - Front And Rear Speaker Locations
• 2009-2013 TSX - Front And Rear Speaker Locations

Honda:

• 2008-2012 Accord - Front And Rear Speaker Locations
• 2012-2013 Crosstour - Front And Rear Speaker Locations
• 2010-2011 Accord Crosstour - Front And Rear Speaker Locations
• 2006-2013 Civic - Front And Rear Speaker Locations
• 2012-2013 CR-V - Front And Rear Speaker Locations
• 2011-2013 CR-Z - Front And Rear Speaker Locations
• 2010-2013 Insight - Front And Rear Speaker Locations
• 2011-2013 Odyssey - Front And Rear Speaker Locations

Alpine S-S65C 240W 6.5" Component Type-S 2-way speaker set w/ Silk Tweeters

EFFICIENT PERFORMANCE

The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.

HAMR SURROUND

Alpine's patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround, which creates incredible linearity and colorization rejection.

General Features:

• 6-1/2" Type-S Series Car Speakers
• Peak Power Handling: 480 watts per pair / 240 watts each
• RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified)
• Tuned poly-mica cone woofer
• Butyl rubber surround for natural response and stability
• 1" Wide-Range Silk dome tweeter
• Optimized air-flow design
• Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity
• HD Polymer frame
• FEA optimized motor structure
• OEM mounting adapters included
• Swivel-mount tweeter
• 4 ohms impedance
• Square-wire short voice coil
• New cone design allows for faster energy transfer & clarity
• Aramid-reinforced TIL bobbin holds voice coil wire very rigidly
• High-grade network components
• Neodymium tweeter magnet structure
• Low-distortion strontium woofer magnet
• Speaker grilles KTE-S610G are optional and sold separately
• Top-mount depth: 2-1/4"

What is in the S-S65C package:

• 2 Woofers
• 2 Woofer mount adapter brackets
• 2 Tweeters (each has a 29" length of wire attached)
• 2 Flush mount housings (with tweeters installed)
• 2 Tweeter grilles
• Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
• 2 Flush mount retention rings
• 2 Stealth brackets
• 2 Foam self-adhesive pads
• 2 Foam self-adhesive rings
• Eight 1-3/16" Screws
• Eight M4x6mm Machine screws
• 8 Speed clips
• Warranty information
• Online product registration information
• Important Notice Sheet
• Template and specs on the box
• S-S65C owner's manual

Honda Speaker Adapter Kit

• Honda/Acura 6 1/2"-6 3/4" Speaker Adapters.
• For Select Acura and Honda models.
• Installs 6 1/2" or 6 3/4" Speakers.
• Dimension: 17"L x 10"W x 2"H.
• Weight: 0.3 Lbs.

Speaker Connector Harnesses

• Universal Speaker to Car Speaker Harness allows the installer to connect aftermarket speakers to the vehicle's
• factory harness without the need to cut or splice the factory wires. Features a high-impact, OEM-quality ABS plastic
• molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling, and heat resistance.
• The precision hand-assembled terminals are pressure-inserted into the plug, making it virtually impossible to pull a wire out.

Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.