It appears that your cart is currently empty
2 Pair Rockford Fosgate R165X3 6.5" 180W Speakers + R1T-S 1-Inch Tweeter Kit
2 Pairs Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters Bundle with Rockford Fosgate Prime R1T-S 1-Inch Tweeter Kit
Rockford Fosgate Prime R165X3 Car Speaker 180W Peak, 90W RMS 6.5" 3-Way PRIME Series Coaxial Speakers w/ Silk Tweeters
The R165X3 is a 6.50" 3-way full-range speaker rated at 90 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers, and mounting hardware.
General Features:
-
Vacuum Polypropylene cone
-
Rubber surround
-
Stamped steel basket
-
Silk dome pole-mounted Piezo tweeter and midrange
-
Integrated tweeter crossover
-
Grilles and mounting hardware included
-
CEA-2031 Compliant
-
Configuration: 3-Way Full-Range
-
Midrange Diameter (in): 6.5"
-
Midrange Depth (in): 2.15" (54.5mm)
-
Tweeter Diameter (in): .50" (12mm)
-
Frequency Response: 52Hz - 20kHz
-
Nominal Impedance: 4-Ohm
-
Power Handling (RMS): 45 Watts RMS
90 Watts MAX
-
Crossover: Tweeter High-Pass (HP): 6dB
-
Sensitivity (dB @ 1 watt/1 meter): 91 dB
-
Grilles Included: Yes
-
Mounting Hardware: Yes
-
Priced Per 2 Pair
-
Authorized Dealer
-
1 Year Warranty
What's in the R165X3 package:
- Two 3-Way speakers
- 2 Grilles
- Two 15' Lengths of speaker wire
- Eight 1-1/4" Self-tapping screws
- 8 Speed clips
- Installation/Operation manual
- R165X3 owner's manual
Rockford Fosgate PRIME R1T-S 160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters
The R1T-S is a 1/2" mylar-balanced dome tweeter kit rated at 40 watts RMS, offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface, and angle configurations. The PRIME series Component System kits are a new generation of factory-replacement speakers that deliver authentic Rockford Fosgate sound. The R1T-S is a dedicated tweeter system featuring a lightweight Mylar® dome for high sensitivity and smooth extended frequency response. This low-distortion material enables accurate high-frequency reproduction for an open sound stage. Multiple tweeter mounting configurations allow for flush, surface, and angled installations.
General Features:
-
Prime Series Tweeter Kit
-
Power Handling: Peak: 160 watts per set / 80 watts each side
-
Power Handling: RMS: 80 watts per set / 40 watts each side
-
Recommended power range: 10 - 40 watts RMS per channel
-
CEA-2031 Compliant speaker system
-
Klippel verified speaker-certified
-
1" Tweeter features a lightweight Mylar dome delivering crisp sound reproduction
-
Low-distortion material allows accurate reproduction of high frequencies for an open sound stage
-
Tweeter High-Pass (HP): 4.5kHz @ 6dB/octave
-
Frequency response: 2,500 - 22,000 Hz
-
Free air resonance: 2,600 Hz
-
Sensitivity: 72.5 dB
-
Surface/angle and flush mount
-
Contains mounting hardware
-
Grilles/trim rings included
-
Authorized Internet Dealer
-
1-year Manufacturer's Warranty
What is in the R1T-S package:
-
Two 1" tweeters
-
2 Flush-mounting brackets (installed)
-
2 Flush mount retaining rings
-
2 Surface mounting brackets
-
Four 5/8" flat-head screws
-
Installation and Operation Instructions
-
R1T-S owner's manual