+1(310)905-0006

Alpine S-A32F 4-Channel Amplifier w/ Pair of Alpine S-S65C 6.5" Component Speakers Package + Absolute KIT8 Complete 8 Gauge Amplifier Wiring Kit

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier

The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.

These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.
General Features:

• Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
• S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
• S-Series Amplifier: Known for reliable performance and value-oriented products.
• Power Output:
• 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
• 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
• Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
• Total power output: 320 watts
• CEA-2006 Compliant Amplifier
• LED Power/Protect Light
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and short speaker protection)
• Frequency Response: 10 - 30,0000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal Noise Ratio: 83 dB
• Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
• Fuse Rating: 40
• Improved heat sink and protection circuit design
• Contain technology currently implemented in the Alpine R and X-Series models
• 105dB Signal-to-Noise (S/N) ratio at rated power
• 46 degrees of phase shift
• Designed to perform perfectly with the existing S-Series speakers and subwoofers
• Dimensions: 8” W x 8” H x 2.25” D
• Authorized Dealer
• 1-year Manufacturer's Warranty

What is in the S-A32F package:

• S-A32F owner's manual
• 4-Channel amplifier
• One 40-amp ATO fuse
• Four 3/4" Screws
• 2mm Allen wrench
• Alpine Verification Certificate
• Warranty information
• Online product registration information

Alpine S-S65C 240W 6.5" Component Type-S 2-way speaker set with 1" Silk Tweeters

General Features:

• 6-1/2" Type-S Series Car Speakers
• Peak Power Handling: 480 watts per pair / 240 watts each
• RMS Power Handling: 160 watts per pair / 80 watts each (CEA-2031 Certified)
• Tuned poly-mica cone woofer
• Butyl rubber surround for natural response and stability
• 1" Wide-Range Silk dome tweeter
• Optimized air-flow design
• Progressive Aramid Fiber Spider with optimized shape for deep bass and linearity
• HD Polymer frame
• FEA-optimized motor structure
• OEM mounting adapters included
• Swivel-mount tweeter
• 4 ohms impedance
• Square-wire short voice coil
• New cone design allows for faster energy transfer & clarity
• Aramid-reinforced TIL bobbin holds voice coil wire very rigid
• High-grade network components
• Neodymium tweeter magnet structure
• Low-distortion strontium woofer magnet
• Speaker grilles KTE-S610G optional and sold separately
• Top-mount depth: 2-1/4"

What is in the S-S65C package:

• S-S65C owner's manual
• 2 Woofers
• 2 Woofer mount adapter brackets
• 2 Tweeters
• 2 Flush mount housings
• 2 Tweeter grilles
• Two 37" Tweeter wires with in-line crossovers
• 2 Flush mount retention rings
• 2 Stealth brackets
• Eight 1-3/16" Screws
• Eight M4x6mm Machine screws
• Warranty information
• Online product registration information
• Important Notice sheet
• Template and specs on the box

⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.