It appears that your cart is currently empty
2 Alpine SWT-10S4 10" 1000W Car Subwoofers + AudioControl THE EPICENTER White Bass Processor
2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers + AudioControl The Epicenter White Bass Processor
2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer
Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow.
An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features:
- 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
- Peak Power Handling: 1,000 watts
- RMS Power Handling: 350 watts
- Recommended Power Range: 100W - 350W
- Poly-Mica Dust Cap & Pulp-Kevlar
- Polyurethane Foam Surround H.A.M.R. Surround Technology
- Spiral Cut Aluminum Former
- 65mm Voice Coil with High-Temp 4-Layer SVC Winding
- 8AWG Push Terminals
- Top-mount depth: 4-3/16"
- Mounting Diameter: 8-15/16''
- Frequency Response: 30 - 200 Hz
- Sensitivity: 84.8 dB
- Authorized Dealer
- 1-year Manufacturer's Warranty
What is in the SWT-10S4 package:
- SWT-10S4 owner's manual
- 10" Thin-mount subwoofer
- Online product registration information
- Warranty information
Audio Control THE EPICENTER White 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote
Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.
Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
General Features:
- Active Epicenter Series 2 channel digital bass restoration and line output converter
- Designed to integrate with after-market or factory OEM systems
- Digital bass restoration restores bass roll-off in factory systems
- Speaker level inputs
- Bass/Gain level remote: Yes
- Signal-Sensing turn-on: Yes
- Preamp outputs: 1 pair
- Bass Maximizer circuitry
- Multiple turn-on options
- PFM Subsonic Filter bypass option
- Selectable impedance load: 20, 60, 20k ohms
- Frequency response: 10 - 100,000 Hz
- Subsonic filter: 20 Hz, 12/dB octave
- Signal-to-noise ratio: >130 dB
- Total harmonic distortion (THD): 0.003%
- Fuse Rating: 1A x 1
- Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H
- Weight: 1.70lbs
- Authorized Internet Dealer
- 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer)
What is in the THE EPICENTER package:
- The Epicenter owner's manual
- Pre-amp Bass Restoration Processor black
- Remote dash mount control
Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.