It appears that your cart is currently empty
Rockford Fosgate R2-500X1 Prime 500 Watt 1ohh Mono punch Amplifier Class D | NEW
Rockford Fosgate Prime R2-500X1 500W Prime Series Monoblock Subwoofer Class D Amplifier
Primed for performance, the R2-500X1 amplifier is a 500 watt, class-D, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the vehicle's electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
General Features:
- Rockford Fosgate Prime R2-500X1
- RMS Power Rating:
- 4 ohms: 300 watts x 1 chan.
- 2 ohms: 500 watts x 1 chan.
- Total power output: 500 watts
- Balanced Differential Inputs with RCA Pass Through Outputs
- High-Level Input Capable
- Defeat able Auto Turn-On Circuit
- Features C.L.E.A.N. Set-up
- Variable Input Gain adjustment level
- R.L.C. Remote Level Control
- Variable Infrasonic Filter
- Continuously Variable On Board Punch EQ
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- CEA-2006 Compliant & CE Compliant
- Full Range Class D
- Rollback Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- Input sensitivity:
- Low-Level: 150 mV - 4 V
- High-Level: 450 mV - 12 V
- Frequency Response: 20 Hz - 250 Hz
- Total Harmonic Distortion (THD): >1%
- Crossover Controls
- Low-Pass: 50 Hz - 250 Hz
- Sub Infrasonic: 15 Hz - 40 Hz
- Recommended Fuse Rating: 80A
- 4 gauge power and ground wiring is recommended for installation
- Dimensions: "1.9" x "6.8" x "8.5"
- Authorized Internet Dealer
- 1 Year Manufacturer's Warranty
What is in the R2-500X1 package:
- Rockford Fosgate R2-500X1 owner's manual
- Mono subwoofer amplifier
- Wired Remote Level Control module
- 16' Remote cable (RJ-25 connector on both ends)
- One 7" Speaker input harnesses
- 3mm Allen Hex key
- Four 3/4" Screws
- Two 1/2" Screws
- 5 Flat washers
- 1 Nut
- Installation and Operation Instructions
- Certificate of Performance
- Rockford Fosgate contact information
⚠️Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca
Your may also be interested in following product
Peavey IPR2 5000 2-channel 5000W Lightweight Po...
Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Cro...
Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-...
$1,447.99 $1,199.99
Peavey IPR 2 3000 Lightweight Power Amplifier
PPeavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Cro...
PPeavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-...
$970.15 $699.99
Peavey IPR 2 2000 2-Channel 2000W Lightweight P...
Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Cros...
Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a r...
$723.99 $599.99
Peavey IPR2 3000 3000 Watt Class D Pro Power Am...
Peavey IPR2 3000 3,000 Watt Class D Pro Power Amplifier Amp + 2 MR DJ SS350 Stand & Two 25 ...
Peavey IPR2 3000 3,000 Watt Class D Pro Power Amplifier Amp + 2 MR DJ SS350 Stand & Two 25 Feet Speakon to 1/4" Cables IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dPEAVramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a hi...
$1,500.00 $899.99