+1(310)905-0006

2004-14 Ford F150 Rockford Fosgate Punch Package w Amplifier & 6x8" Speakers (4) P1683 6" x 8" 3Way Coaxial Car Speakers + P400X4 4Channel Class AB Full Range Amplifier + (4) Speaker Adapter Harnesses

2 Rockford Fosgate Punch P1683 260W Peak (130W RMS) 6" x 8" Punch Series 3-way Full Range Coaxial Speakers (2 Pair)

Fans needing a great-sounding speaker to replace factory-installed garbage will benefit from this Punch series full-range speaker. The P1683 offers a Flex Fit™ basket to ensure compatibility with odd-shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes.

The P1683 is a 6” x 8” 3-way full-range speaker rated at 65 watts RMS, designed for fanatics needing a quality factory replacement driver. It includes two speakers, integrated high-pass crossovers, and mounting hardware.

General Features

• 6" x 8" Punch Series 3-way Full Range Speakers
• Power Handling:
• Peak: 260 watts per pair / 130 watts each
• RMS: 130 watts per pair / 65 watts each
• Recommended power range: 10 - 70 watts RMS per channel
• Injection-molded mineral-filled polypropylene cone
• Butyl rubber surround
• 0.75" PEI Dome tweeter
• Flexfit basket design
• OEM Adapter plate included
• Recessed tweeter mount uses standard 1-3/4" hole
• CEA-2031 compliant speaker
• Top-mount Depth: 2.28"
• 4 ohms impedance
• Frequency Response: 65 - 24,000 Hz
• Sensitivity: 90dB
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Rockford Fosgate Punch P400X4 400W Punch Series 4-Channel Stereo Class AB Car Power Amplifier (P400X.4)

The P400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Drop a pair of component speakers on the front channels and subs on the rear, and BOOM—you've got "The PUNCH." With its flexible design, the P400X4 is an excellent amplifier choice for virtually any vehicle.

The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-ohms. It is perfect for a 4-way full-range or 3-way system with a front stage and subwoofers on the rear channels.

The stealth top-mounted control panel gives the amp a sleek finished look and protects the vital controls.

Our custom heat sink design uses high aluminum mass where needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.

General Features:

• Rockford Fosgate Punch Series P400X4
• Class-AB FullRange 2-Ohm Stable 4-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 50 watts x 4 channel
• 2 ohms: 100 watts x 4 channel
• Bridged, 4 ohms: 200 watts x 2 channel
• CEA-2006 Compliant Amplifier
• Features C.L.E.A.N. Set-up with 10-step set-up procedure
• w/ input/output clip detection and indicator LEDs
• Pulse Width Modulated MOSFET power supply
• LED power (blue) and protection (red) indicators
• Stealth top-mounted control panel
• Soft start turn-on
• 4, 3, or 2 channel operation
• Nickel-plated RCA level inputs
• Nickel-plated captive C-clamp terminals
• High-level input capable of Auto Turn-On circuit (RFIF2SW required, sold separately. Up to TWO adapters are needed for this amplifier.)
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• On-board differential inputs eliminate noise picked up by the signal cable
• Integrated Trans•ana technology simplifies the amplifier's signal path, allowing the signal to travel through the amplifier at a lower voltage. The result is more excellent reliability and exceptional sound quality
• MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
• DSM (Discrete Surface Mounted Components) utilizes 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise, similar to circuit boards designed by aerospace manufacturers
• Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
• Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low
• Input sensitivity: 150mV - 12V
• Frequency Response: 20 - 20,000 Hz
• Total Harmonic Distortion (THD): <1.0%
• Signal to Noise Ratio: 105dB
• Selectable crossover modes: LP / AP / HP
• Variable crossover filter: 50 - 250 Hz, 12 dB/octave
• Variable Bass Boost, Punch EQ: 0 to +14 dB bass boost at 12.5 kHz
• Variable Bass Boost, Punch EQ: 0 to +18 dB bass boost at 45Hz
• Fuse Rating: 60 A x 1 inline fuse recommended, not included
• 8 - 18 gauge speaker wire connections
• Installation requires 4- 8 gauge power and ground wiring. Click here for our contact information. We offer a discount on select amplifier kits from our website when purchased together with this amplifier.
• 8 Gauge is perfect for a full 4-ohm setup, while 4 Gauge is recommended for a full 2-ohm setup
• Dimensions: 11.03"W x 7.76"L x 2.38"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.