It appears that your cart is currently empty
PAC SWI-RC Steering Wheel Control Interface retain factory steering wheel audio controls
PAC Steering Wheel Control Interface retains factory steering wheel audio controls SWI-RC
Control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input.
- Retains steering wheel control functions when replacing the factory radio
- Retains programming even if the vehicle's battery is disconnected
General Features:
- Quick and easy pre-programmed button function by DIP switch selection
- Works on Analog (resistive) and Data SWC systems
- For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC
- Supports classic, SWI-RC style button programming
- Customizable button functions (short press/long press/button reassignment)
- Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications)
- Compatible with all late-model brands of radios with 3.5mm or two-wire connections
- The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you will need to use the SWI-X.
- Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5.
- Clarion model CZ500 does not support remote Bluetooth controls
- JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
- Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
- Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
- Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input.
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Your may also be interested in following product
Crux BTGM-33 Bluetooth Hands-Free with Music St...
Crux BTGM-33 Bluetooth Hands-Free with Music Streaming (for Select GM Vehicles), Black • Adds Blu...
Crux BTGM-33 Bluetooth Hands-Free with Music Streaming (for Select GM Vehicles), Black • Adds Bluetooth Handsfree Calling to the OEM radio• Adds 4-channel Bluetooth Music streaming to the OEM Radio• Automatically pauses BT Streaming when a call is received and resumes when the call is ended• Retains Onstar Function• Dimension: 3.5" L x 2.5" W x 7" H Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca..
$219.98 $129.99
PAC SWI-CP2 ControlPRO Universal Analog/CANbus ...
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch V...
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch Vehicle Selection The ControlPRO SWI-CP2 retains the built-in steering wheel controls in vehicles when replacing the factory radio with an aftermarket radio. It is compatible with today’s most popular vehicles, even with more complex electronic systems, including CAN bus, GMLAN, and Class II systems. The simple-to-use module can be configured in multiple ways, via DIP switches, directly from a USB-...
$119.99 $79.00
PAC SWI-CP2 Universal Steering Wheel Control In...
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch V...
PAC SWI-CP2 ControlPRO Universal Analog/CANbus Steering Wheel Control Interface with DIP Switch Vehicle Selection The ControlPRO SWI-CP2 retains the built-in steering wheel controls in vehicles when replacing the factory radio with an aftermarket radio. It is compatible with today’s most popular vehicles, even with more complex electronic systems, including CAN bus, GMLAN, and Class II systems. The simple-to-use module can be configured in multiple ways, via DIP switches, directly from a USB-...
$119.99 $79.00
Audio Control LC7i 6-channel line output conver...
Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black...
Audio Control LC8i 8-channel line output converter — add amps and subs to a factory system (Black) AudioControl's LC8i 8-channel line output converter (LOC) allows you to add aftermarket amps, speakers, and subs to your car's factory radio, so you can enjoy better and more powerful sound without losing climate controls, voice-activated functions or other built-in factory features. The LC8i accepts speaker-level signals, so you can use it with just about any setup, even high-powered amplified...
$499.98 $215.00