It appears that your cart is currently empty
AudioControl The Epicenter Micro Bass restoration processor and line output converter
AudioControl The Epicenter® Micro Bass restoration processor and line output converter
Add bass to your aftermarket system's high-level sourceMost factory radios dial down deep, low-hitting bass notes to protect flimsy factory speakers. The Epicenter Micro from AudioControl takes amplified speaker-level signals, converts them into the high-quality preamp signals your sub amp needs, and then adds the bass that's missing. Even when listening to traditionally bass-weak classical, jazz, folk, or Tejano music, you'll finally be able to hear all the good bass you've been missing
How does it do it?
Sophisticated processing analyzes the incoming signal and synthesizes low-bass fundamental tones, increasing bass response tremendously. A single band ParaBASS® equalizer lets you fine-tune your subwoofer's tone. A selectable subsonic filter removes extreme low frequencies so your amps and subs will play more efficiently.
The Epicenter Micro will also connect to any receiver with preamp outputs — its balanced inputs will reject noise from your car's electrical system for ultra-clean output.
Installation conveniences The included ACR-4 dash-mount wired remote control allows you to adjust the level of your sub channel on the go. Load selection switches make OEM factory system integration easier, so The Epicenter Micro will work with almost any vehicle's sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sigal , or remote 12-volt input.
Product highlights:
- active 2-channel line driver/output converter with bass restoration
- designed to work with aftermarket and factory systems
- provides up to 9.5 Vrms output (selectable level: 5, 7, 10V)
-
preamp and speaker-level inputs
- speaker-level inputs handle up to 40V (400 watts RMS)
- speaker-level inputs feature switchable load resistance (20, 60, or 20,000 ohms) to prevent factory stereo shut-down
-
Epicenter bass restoration increases bass response
- Para-Bass controls adjust center-frequency and width of bass EQ processing
- ACR-4 wired remote included
- switchable Programmable Frequency Match (PFM) subsonic filter (20 Hz, 12/dB octave)
- selectable ground isolation helps eliminate noise
- auto turn-on via 12V remote, DC offset, or audio signal detect
- 12-volt turn-on lead output
-
wiring, fuse, and hardware not included with device
- 18-gauge power and ground leads and a 1-amp fuse recommended
- dimensions: 5-1/8" W x 1" H x 3" D
- warranty: 5 years
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Your may also be interested in following product
Soundstream BX-10MX Digital Bass Reconstruction...
Soundstream BX-10MX Digital Bass Reconstruction Processor Mexico Special Edition Digital Bass Rec...
Soundstream BX-10MX Digital Bass Reconstruction Processor Mexico Special Edition Digital Bass Reconstruction Processor w/ Dash Mount Remote Gain Control General Features: Dash Mount Remote Control Bass Restoration Lighted Display Parametric Bass Control PFM Subsonic Filter Balanced Inputs Bass Output Control PWM High Head Room Power Supply Output Level: 13.5 volts Frequency Response: 10Hz 100KHz THD: 0.003% S/N Ratio: 130dB Balanced Input Noise Rejection: 60 dB Warning:This product can expo...
$99.99 $79.99
Cerwin Vega CVM0 Digital BASS Booster Epicenter...
Cerwin Vega CVM0 Digital BASS Booster Epicenter BX10 W Remote Bass Knob Control The CVM0 is the ...
Cerwin Vega CVM0 Digital BASS Booster Epicenter BX10 W Remote Bass Knob Control The CVM0 is the most powerful bass component. This device is equipped with several different bass output selections. The Cerwin-Vega Mobile CVM0 for your car audio system. The Cerwin Vega Mobile CVM0 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin Vega Mobile dealers can help guide you with various installation applications and technical informati...
$139.99 $69.99
Audio Control LC2i 2 Channel Line Out Converter...
Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your ...
Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volu...
$199.99 $109.00
Audio Control ACR-2 Remote Level/Bass Control F...
Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote lev...
Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' ...
$90.00 $45.00