It appears that your cart is currently empty
AudioControl LC2i PRO 2-channel line output converter+ Electrical Tape+ Phone Holder
AudioControl LC2i PRO 2-channel line output converter+ Free Absolute Electrical Tape+ Phone Holderr
High-level input line output converter
More and more aftermarket amplifier installations depend on using the factory amp's powered outputs for its inputs. AudioControl's LC2i PRO line output converter takes amplified speaker-level signals and converts them into high-quality preamp signals that can then be fed to another processor, a full-range amplifier, or your subwoofer amp.
Bass feature
Some factory radios dial down the bass as you increase the volume to protect the flimsy factory speakers. The problem is, they don't give it back when you upgrade to a nice set of aftermarket speakers. AudioControl packs the LC2i PRO with their AccuBASS™ circuitry that reverses the factory low-frequency roll-off, giving you the bass you need to enjoy your music to the fullest.
Installation conveniences
The included dash-mount wired remote control allows you to adjust the level of your subchannel on the go. Load selection switches make OEM integration easier, so the LC2i PRO will work with almost any factory sound system. Selectable turn-on modes include GTO™ Signal Sense (DC offset), audio sense, or remote 12-volt inputs.
Product highlights:- 2-channel active line output converter
- ACR-1 wired remote bass level control included
- Two speaker-level inputs with 40-volt (400 watts RMS) power handling
- Main and Bass preamp-level outputs (up to 9.5 volts)
- Main and Bass output controls for level matching
- adjustable AccuBASS corrects for factory bass roll-off
- selectable turn-on options: GTO signal Sense (DC offset), audio sense, or remote 12-volt input
- 12-volt turn-on lead output
- recommended fuse rating: 1 amp
- dimensions: 6-15/16"W x 1"H x 3"D
- weight: 0.75 pound
- warranty: 5 years
- Two-channel line output converter
- Two 4-pin captive-screw connectors (installed)
- ACR-1 Level control
- 16.5' Level-control cable (RJ-14)
- Quickstart guide (on cardboard label)
Absolute BT1700 Vinyl Electrical Tape is a high-quality, multi-purpose vinyl insulating tape that is highly resistant to moisture and varying weather conditions. It is a polyvinyl chloride (PVC) tape that is flame-retardant and conformable.
Details
- Resists abrasion, moisture, alkalis, solvents, and acids
- Flame-retardant and inhibits the corrosion of electrical conductors
- Made of durable PVC
- Compatible with rubber and synthetic splicing compounds
- It withstands a temperature range of 32 to 194 °F (0 to 90 °C)
- UL Listed, CSA and VDE Certified
-
Adhesive Type Rubber Application Insulation Brand Absolute Elongation at Break 200 % Maximum Operating Temperature (Celsius) 90 Degree Celsius Maximum Operating Temperature (Fahrenheit) 194 Degree Fahrenheit Minimum Operating Temperature (Fahrenheit) 32 Degree Fahrenheit Overall Length (Imperial) 60 ft Overall Length (Metric) 18 m Overall Width (Imperial) 0.75 in Overall Width (Metric) 19 mm Product Color Black Shelf Life 5 Year Tape Grade General Use
Warning:
This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Your may also be interested in following product
Soundstream BX-10MX Digital Bass Reconstruction...
Soundstream BX-10MX Digital Bass Reconstruction Processor Mexico Special Edition Digital Bass Rec...
Soundstream BX-10MX Digital Bass Reconstruction Processor Mexico Special Edition Digital Bass Reconstruction Processor w/ Dash Mount Remote Gain Control General Features: Dash Mount Remote Control Bass Restoration Lighted Display Parametric Bass Control PFM Subsonic Filter Balanced Inputs Bass Output Control PWM High Head Room Power Supply Output Level: 13.5 volts Frequency Response: 10Hz 100KHz THD: 0.003% S/N Ratio: 130dB Balanced Input Noise Rejection: 60 dB Warning:This product can expo...
$99.99 $79.99
Cerwin Vega CVM0 Digital BASS Booster Epicenter...
Cerwin Vega CVM0 Digital BASS Booster Epicenter BX10 W Remote Bass Knob Control The CVM0 is the ...
Cerwin Vega CVM0 Digital BASS Booster Epicenter BX10 W Remote Bass Knob Control The CVM0 is the most powerful bass component. This device is equipped with several different bass output selections. The Cerwin-Vega Mobile CVM0 for your car audio system. The Cerwin Vega Mobile CVM0 Digital Bass Processor is designed and engineered to reproduce extreme bass in your vehicle! The authorized Cerwin Vega Mobile dealers can help guide you with various installation applications and technical informati...
$139.99 $69.99
Audio Control LC2i 2 Channel Line Out Converter...
Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your ...
Audio Control LC2i 2 Channel Line Out Converter Accubass and Subwoofer Control for amps to your factory system The LC2i is a compact, two-channel processor with active input circuitry. It can accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality preamp signals that can be directed to after-market processors and amplifiers. As a result, users can enjoy maximum sound quality while maintaining factory volu...
$199.99 $109.00
Audio Control ACR-2 Remote Level/Bass Control F...
Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote lev...
Audio Control ACR-2 Remote Level/Bass Control For Select AudioControl Processors Add remote level control for your LCQ-1. This is the replacement remote for the Epicenter® Plus. Comes with a 20-foot cable and removable mounting enclosure (for custom dash installations). General Features: Wired Remote Level Control Mounts on the dash using built-in bracket Detachable mounting plate Works with select AudioControl sound processors Direct replacement remote for the Epicenter Includes 20' ...
$90.00 $45.00