+1(310)905-0006

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier& 4 Gauge KIT4 Amp Kit

Package Includes:

• (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box
• (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D
• (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box

• Includes R-W10D4 wired in parallel
• 750W RMS power handling
• 2Ω Impedance
• Ported enclosure design
• Frequency response: 26-200 Hz
• Vented enclosure tuning frequency: 36 Hz
• Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D

What is in the box:

• Ported enclosure loaded with one R-W10D4 subwoofer driver
• Rubber flange protector (installed on the subwoofer)

Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS)

The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience.

The R-Series Amplifiers have a diagnostic LED located behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is currently too hot for operation and needs to cool down. A solid red light can mean three things; 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high.

The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.

General Features:

• Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1
• Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1
• THD 10 W into 4 Ohms: Less Than 0.02%
• THD 10 W into 2 Ohms: Less Than 0.03%
• THD Rated Power 4 Ohms: Less Than 0.3%
• THD Rated Power 2 Ohms: Less Than 1.0%
• S/N Ratio: 1 W into 4 Ohms: >85dB
• Frequency Response: +0/-3 dB 10Hz - 400Hz
• Frequency Response: +0/-1 dB 15Hz - 325Hz
• Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V)
• Crossover: Variable HPF/LPF, (50Hz - 400 Hz)
• Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8"
• Weight: 7lb

In the box:

• R-A75M Mono Amplifier
• 4 x M4x20 Self Tapping Screws
• 8 x Mounting Bracket Screws
• 4 x Mounting Brackets
• 1 x Hexagon Wrench

Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

General Features:

• Complete 4 Gauge Amplifier Kit
• Designed specifically for car audio systems up to 1000 watts
• Premium power and ground wire provides optimal power transfer
• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
• Terminals are gold-plated for excellent signal transfer
• For use in any car, truck, RV, or boat
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Package Includes:

1. 17 ft. of red 4 AWG high current power cable
2. 3 ft. of black 4 AWG ground cable
3. 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
4. 20 ft. of 12 AWG OFC Speaker cable
5. 20 ft. of 16 AWG remote turn-on wire
6. 6 ft. of split loom tubing
7. 1 Gold plated 80 AMP AGU fuse
8. 1 4 AWG gold ring terminal
9. 1 4 AWG water-resistant inline fuse holder
10. 2 Ring terminals
11. 2 Spade terminals (4 gauge)
12. 5 Spade terminals (14-16 gauge)
13. 3 Self-tapping screws
14. 1 Rubber grommet
15. 20 Black cable ties
16. 2 Butt connectors (18-22 gauge)
17. 1 Butt connector (4 gauge)

⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov